Hot Runner Controller Accessories
Hot Runner Controller Accessories
Hot runner controller accessories including heater cables, thermocouple cables, combined cables, connectors and replacement parts.
Hot Runner Controller Accessories
Hot Runner Controller Accessories
TOPOWER is a hot runner controller specialist and can offer almost all accessories for hot runner controller systems, including time sequential controllers, connection cables, connectors and related replacement parts for project matching and maintenance.
Key Features
- Connection cables for hot runner controller and mold wiring matching.
- Connectors for different controller standards and project requirements.
- Time sequential controller support for valve gate control projects.
- Replacement parts and accessories for hot runner controller maintenance.
Product Packaging And Detail Reference
Common reference images are shown separately so product photos, module details and packing views are easier to compare.
Product Overview
Built For Stable Hot Runner Production
Hot runner controller accessories are the parts that make the controller match the real mold wiring: heater cables, thermocouple cables, combined power and thermocouple cables, connector housings, plugs, sockets and shelves. In many projects, the controller model is only half of the matching work. If the cable type, connector pin count or thermocouple compensation cable is wrong, the installation can still fail even when the controller itself is correct.
TOPOWER supplies accessories for hot runner temperature control systems, including power input/output cables, thermocouple input/output cables and combined power and thermocouple input/output cables. A standard power cable should not be treated as a thermocouple compensation cable. J type thermocouple cable carries the temperature signal and should be matched correctly with the power cable or combined cable according to the mold wiring design.
Before ordering accessories, buyers should confirm cable type, cable length, connector type, pin count, thermocouple type and the connection way on the mold side. For replacement orders, clear photos of the existing connector and wiring label are helpful. For new projects, a wiring drawing allows TOPOWER to check the accessory list together with the controller quotation.
Quick Information
- ModelAccessories
- Zone CountCable / Connector Matching
- SeriesHot Runner Controller Accessories
- DimensionsConfirm by accessory type
- WeightConfirm by quantity
Main Features
Designed for temperature stability, quicker maintenance and clearer fault diagnosis during injection molding production.
Controller Matching
Accessories are selected according to controller model, mold wiring and connector standard.
Cable Type Separation
Power cable, thermocouple cable and combined cable are checked separately to reduce signal and wiring mistakes.
Connector Options
Multiple pin counts and connector standards are available for different hot runner molds and controller cabinets.
Replacement Support
Useful for maintenance teams replacing worn cables, damaged connectors or missing project accessories.
Custom Length Available
Cable length can be confirmed according to production line layout and cabinet position.
Project Review
Photos, drawings or previous part information help TOPOWER confirm the right accessory before shipment.
Technical Specification
Key technical points are summarized by application, so mold matching, electrical confirmation and quotation review are easier to read.
Temperature Control
This section explains how the controller keeps each hot runner zone stable during production, including thermocouple matching, sampling speed, control mode and alarm behavior.
- Thermocouple cable: Thermocouple input/output cable for temperature signal transmission
- Thermocouple compensation: J type temperature compensation cable available according to project requirement
Electrical Data
These electrical details help confirm whether the controller matches the site power supply, heater load and mold wiring before production starts.
- Power cable: Power input/output cable for hot runner controller systems
Connection & Cable
These accessory parameters are mainly used to confirm connector type, pin count, cable length and thermocouple matching, so the parts can plug into the mold without rework.
- Combined cable: Power and thermocouple input/output cable for integrated wiring needs
- Connector types: 5-pin, 10-pin, 16-pin, 24-pin, 25-pin, HE series, H-048 and DME standard options
- Cable length: Standard 4m or custom length
General Specification
These points summarize how the accessory should be selected for the controller, mold wiring and production line layout.
- Accessory types: Heater cables, thermocouple cables, combined cables, connectors, shelves and replacement parts
- Quotation information: Cable type, connector type, pin count, length, quantity and wiring requirement
- Application: Hot runner controller wiring, maintenance replacement and distributor stock
Standard Configuration
The final configuration is confirmed according to zone count, connector type, voltage and cable requirement.
Power cable, thermocouple cable or combined power and thermocouple cable.
5-pin, 10-pin, 16-pin, 24-pin, 25-pin, HE series or DME standard according to mold wiring.
Standard 4m length or custom length for the production line.
Cable and connector matching checked before shipment to reduce installation risk.
Applications
TOPOWER hot runner controllers are used in automotive plastic parts, bottle caps, medical plastic products, packaging and toy production where stable molding temperature supports consistent output.
Automotive
Caps
Medical
Packaging
Toys
Before Quotation, Confirm These Details
These items help TOPOWER check compatibility and prepare a useful quotation instead of a vague price.
Cable type: power, thermocouple or combined cable
Connector type and pin count
Cable length and outer covering requirement
Thermocouple type: J type or K type
Mold wiring drawing or clear connection photo
FAQ
Can accessories be ordered without a controller?
Yes. Send cable type, connector photos, pin count, length and quantity for checking.
Why can a power cable not replace a thermocouple cable?
Thermocouple cables carry temperature signals and may require compensation material. Using the wrong cable can cause inaccurate readings.
What is the standard cable length?
The product material references 4m standard connection cable. Custom length can be discussed.
What information helps TOPOWER confirm the correct connector?
Photos of the plug and socket, pin count, wiring drawing, controller model and mold side requirement are useful.
Need this product configured for your mold?
Send model, zone count, voltage, thermocouple type and cable requirement. TOPOWER will help confirm the right configuration.
Send Inquiry