Temperature Sensor: 7 Checks Before You Specify
A 24-zone manifold shows up reading 18 °C low on every zone. Same controller. Same heaters. Same setpoints. The sensors were swapped last month, maintenance checked.
Read articleResources
Hot Runner Controller Blog and Technical Guides
Read practical guides about hot runner temperature controllers, modular vs touch screen selection, zone count planning, troubleshooting and injection molding control for real production and purchasing decisions.
Latest Articles
Read TOPOWER technical guides about hot runner controller selection, zone count planning, accessories and injection molding applications.
PID Controller: 7 Practical Steps to Stable Temperature Control
Zone 4 on a 12-zone manifold keeps overshooting. New PID controller. New thermocouple. The heater measures 620 W, close enough to the drawing. So maintenance changes.
Read article
Solid State Relay: Practical 7-Step Selection Guide
Sixteen zones, one controller, and the same relay keeps dying on zone 7. The maintenance tech swaps it, the new one lasts three weeks, and the.
Read article
Self-Regulating Heat Tracing: 4 Essential Checks Before Your Line Fails
A Freeze Night That Started With One Wrong Cable The call came at 2 a.m. from a water treatment plant. A twenty-metre run of instrument tubing.
Read article
Injection Molding News: 5 Proven Shifts That Threaten Every Mold Shop
The Injection Molding News Most Shops Read and Nothing Changes Every mold shop I have visited reads the same industry headlines. Energy prices, resin volatility, reshoring,.
Read article
Sideplate Locks Under $100: 3 Essential Checks Before You Risk It
The Price Tag on Sideplate Locks Under $100 The global injection mold market reached $35.7 billion in 2026, and automotive work alone absorbs roughly a quarter.
Read article
Draft for Internal Luer Connector Molding: Why 1.5° Core Pins Fail and Proven Fixes That Work
Why Draft for Internal Luer Connector Molding Breaks Normal Rules Draft for internal luer connector molding almost never follows the shop-floor default of "one to two.
Read article
K Type Thermocouple: The Simple 2026 Guide for Hot Runner Molds
Introduction The global thermocouple market was worth about USD 763 million in 2025 and should reach USD 1.11 billion by 2035, expanding near 3.8 percent a.
Read article
Soft Machining vs Hard Machining: What's the Difference?
Soft Machining vs Hard Machining: What's the Difference? Soft machining is the first cutting operation on a workpiece, performed while the metal is still in its.
Read articleArticle Topics
Browse guides by common buyer questions during hot runner controller selection and project matching.
SelectionChoosing controller type and zone count.
TroubleshootingAlarms, thermocouple failure and heating problems.
ApplicationsMold makers, injection molding factories and distributors.
AccessoriesCables, connectors and replacement parts.